Want to use your Apple Watch as an alarm clock? Whether you wear your Apple Watch to bed, or use it in nightstand clock mode, you can set your Apple Watch to function as an alarm clock.
There are a few different ways to add alarms to Apple Watch, we’ll show you various methods to setting an alarm using Siri for both repeating alarms and one-off alarms, as well as using the Apple Watch Alarms app to set an alarm.
How to Add Alarm on Apple Watch with Siri
The easiest way to add an alarm to the Apple Watch is by using Siri. To set a one-time alarm on Apple Watch with Siri:
Summon Siri on the Apple Watch (by using Hey Siri, raise-to-Siri, or holding the rotating dial button), then say “Set an alarm for (time)”
For example, to set an alarm for 5:30 am, you’d say “set an alarm for five thirty A M”.
How to Set Repeating Alarm on Apple Watch with Siri
To set a repeating alarm that goes off every day at the same time, use the following syntax:
Summon Siri on the Apple Watch, then say “Set a repeating alarm for six thirty A M”
A repeating alarm will repeat every day at the same time, so if you want a consistent alarm this is a good way to have one.
How to Set Alarm Clock on Apple Watch with Alarms app
You can also set an alarm clock on Apple Watch by using the Alarms app, this requires multiple steps performed on the watch itself:
Open the Alarms app on Apple Watch then tap on “Add Alarm”
Choose whether you want the alarm to be AM or PM
Next tap on the hour and use the rotating dial button on the Apple Watch to select the hour you want the alarm to go off on
Then tap on the minutes and again use the rotating dial to set the minutes
Tap on the “Set” button to set the alarm
To set the alarm to repeat, tap the alarm time to edit the alarm, then tap the “Repeat” option and adjust accordingly
You can set other customizations to the alarm as well, including changing the name, changing the alarm clock time, and whether or not to allow snoozing of the alarm.
How to Snooze & Stop Alarms on Apple Watch
You can snooze the alarm clock on Apple Watch by pressing the rotating dial button.
You can stop and turn off the Apple Watch alarm by pressing the other flat button on the Apple Watch.
How to Easily Check What Alarm is Actively Set on Apple Watch
Aside from going into the Alarms app and looking at which alarms are active there, there’s another convenient way to easily see what alarms are set on Apple Watch.
When the Apple Watch is placed into Nightstand Mode (sideways on a charger), tap on the screen to see the clock and look for the “Alarm (time)” text directly under the main clock. Optionally you can use a knock on the nightstand to wake the Apple Watch screen and see the alarm that way too.
How to Delete Alarms on Apple Watch
Open the Alarms app on Apple Watch
Tap the alarm you want to delete
Scroll to the bottom of the edit alarm list and tap on “Delete” to remove the alarm
You can delete alarms that were set by Siri or alarms that were added manually, removing the alarm is the same regardless of how it was added and set in the first place.
Need to archive an iTunes backup of an iPhone or iPad for safe-keeping? Creating an archived backup in iTunes is helpful because it allows you to preserve a specific device backup while still allowing for backing up to iTunes on Mac or PC, without those new backups overwriting the archived backup.
Creating routine backups of iPhone and iPad are important in general, but if you ever plan to try a beta release of system software like iOS public beta or iPadOS public beta, you’ll want to go a step further and archive an iTunes backup as well, since it makes it easier to revert to a prior release (like downgrading iOS 13) if necessary.
How to Archive iTunes Backup of iPhone or iPad on Mac & Windows
This obviously focuses on archiving backups in iTunes, but in MacOS Catalina these same actions are performed in the Finder, where device management occurs, rather than in iTunes.
Open the iTunes application if you have not done so already on Mac or Windows
Optionally, start and complete a new encrypted backup to iTunes if you wish to create a fresh backup to archive then proceed when finished
Pull down the iTunes menu and choose “Preferences”
Go to the “Devices” tab in iTunes Preferences
Under the Device Backups list locate the device backup you want to archive, then right-click on that backup and choose “Archive”
Ensure that the iPhone or iPad backup has been archived by checking for the lock icon and date stamp on the backup name, when finished click on “OK” to exit out of iTunes Preferences
Archiving a backup essentially locks that backup so that it is not overwritten by subsequent device backups made to iTunes.
Again, iCloud has no impact on backups in iTunes. You can backup to both iCloud and iTunes if desired.
Identifying Archived Backups in iTunes
In the device list this is easy to identify because there is a lock icon and a time and date stamp on when the backup was archived.
You can un-archive a backup by right-clicking on it from within the same Devices settings list, and of course you can also delete backups from iTunes there as well.
Remember that in iTunes it’s important to encrypt backups so that all Health data and sensitive data is also backed up, because without the backup encryption feature enabled that data will not be backed up to iTunes. Backing up iPhone or iPad to iCloud is encrypted by default and does not require the manual encryption setting.
Note you can not currently archive iCloud backups, so if you wish to preserve an iPhone or iPad backup you must use iTunes and archive the backup there, or a Mac with at least Catalina and archive the backup there.
Want to watch MKV videos stored in the Files app on an iPad? You can do that easily once you learn how. This makes it simple to keep locally stored MKV movies on iPad within the Files app to be able to watch directly on the device.
If you have an MKV video file in the Files app of iPad that you want to watch, you may have noticed that by default the Files app is not able to play mkv video files. But not to worry, with the help of a free app you can easily watch any MKV movie that is located in the Files app of an iPad.
Open the Files app on the iPad and navigate to the MKV movie file you want to watch
Tap on the MKV video and then tap on the Share button, it looks like a box with an arrow flying out of the top
Choose “Open in VLC” to open the MKV movie file into the VLC app*
Watch your MKV video in VLC, you can play, pause, fast forward, rewind, and perform all other expected video watching capabilities in VLC on iPad
*Sometimes you must first choose to “Copy to VLC” from the Sharing menu, then tap out of the Share sheet, wait a moment or two, and then open the Sharing screen again to choose “Open in VLC”.
Note that every time you wish to watch the MKV video in VLC you will need to manually choose to do so through the same Sharing menu within Files app.
With iPadOS 13 (and later) you can even use this same trick to watch MKV video files from the Files app that are on a local network share, so if you have an SMB file server you can access that through Files app and then load any mkv movies directly into VLC too.
If for some reason this method doesn’t work from playing the MKV video file directly from Files app on iPad or iPhone, you can also use the wi-fi upload method to VLC to watch MKV, AVI, and other videos on iPhone and iPad, which basically copies the movie file directly to the VLC app storage on the device.
Need to save a webpage as a PDF file on a Mac? Safari on the Mac makes saving webpages as a PDF very easy. Exporting a webpage in PDF format is useful for many purposes, whether you want to access an offline version of a webpage or article, to transmit information on a webpage as PDF format like a health record, call record, bill, or statement, for records keeping purposes, to send to someone else or a print shop, and so much more.
This tutorial will show you how to easily save a webpage as a PDF file using the Safari web browser on a Mac.
Note if you’re using an iPhone or iPad, you can save webpages as PDF on iPhone or iPad with these instructionsinstead.
How to Save Webpages as PDF on Mac with Safari
Open Safari on the Mac, then navigate to the webpage you want to save as a PDF file
Pull down the “File” menu in Safari
Choose “Export as PDF” from the File menu
Set the file name and choose a file destination and choose “Save” to save the webpage as a PDF
The PDF file of the saved webpage will be wherever you saved the file to, whether that was your user Documents folder, the Desktop, Downloads folder, or elsewhere.
The resulting webpage PDF can be used just like any other PDF file, you can email it, share it, upload it, or whatever else just like any other PDF document.
If for some reason this doesn’t work for you, or if you’re using a different web browser on a Mac that doesn’t support the direct ‘Export as PDF’ option, you can still easily save a webpage as a PDF by simply using Print to PDF on the Mac, which is available on every Mac OS release. If you find yourself using that feature often enough you can even set a “Save as PDF” keyboard shortcut for use on the Mac to be able to quickly perform that function.
Obviously this covers saving a webpage as a PDF file on Mac OS with Safari, but iPhone and iPad can save webpages as PDF too using an equally simple and direct feature.
Wondering how long an iCloud backup restore to an iPhone or iPad will take to complete? Restoring an iPhone or iPad from an iCloud Backup can take a while, depending on the size of the iCloud backup, and the speed of the internet connection the iOS device is connected to.
If you want to check on the progress of an active iCloud Restore, you can do so in modern versions of iOS.
How to Check Progress of iCloud Restore from Backup on iPhone or iPad
Open the “Settings” app in iOS
Tap on “Your Name” at the top of the Settings
Tap on “iCloud”
Tap on “iCloud Backup”
Locate the data remaining information on the iCloud backup restore process under the ‘Stop’ button to get a rough idea of how much longer the restore will take
The data remaining information will be shown in megabytes (MB) or gigabytes (GB).
It’s best to let the iCloud Restore process complete, however long it may take. Failure to let the iCloud restore from backup process complete can lead to permanent data loss.
Optionally, but not recommended, you can stop an iCloud Restore from backup to an iOS device. Stopping an iCloud Restore can result in data loss and is therefore not recommended unless there is a compelling reason to do so.
While the iCloud Restore process is ongoing, you may notice notably poor battery life on the iPador iPhone as the devices “Ongoing Restore” background activity and downloading of data uses more energy than usual. Letting the iCloud Restore process complete will return the device to normal expected battery performance.
Note that much earlier versions of iOS do not support this feature.
By comparison, checking the restore progress of an iTunes backup restore is much more obvious because the iTunes window has a progress indicator showing the current progress and how long it will take to complete.
Sometimes, an iPad Pro must be placed into DFU mode as a troubleshooting step before being able to restore the iPad Pro. DFU stands for Device Firmware Update and DFU mode is basically a lower-level device restore state than regular Recovery Mode for iPad Pro.
Placing an iPad Pro into DFU mode is for advanced users and for specific troubleshooting scenarios where an iPad Pro is unable to recover or restore through regular methods.
This approach for entering into DFU mode covered here applies only to newer iPad Pro devices of the 2018 model year and later, meaning those without a Home button and with Face ID as the primary unlock mechanism, including the iPad Pro with 11″ screen and iPad Pro with 12.9″ screen. Other iPad models with Home button can enter DFU mode with these instructions instead, which uses a different method.
To use DFU mode properly, you’ll need the iPad Pro a USB cable, and a Mac or Windows PC with iTunes, or macOS Catalina.
How to Enter DFU Mode on iPad Pro
Warning: Restoring a device with DFU mode will erase the iPad Pro and may cause permanent data loss. If you do not have a backup of the iPad Pro available you will have no data to restore to the device.
Connect the iPad Pro to the computer by using a USB cable
Open iTunes on the Mac or Windows PC (this is not in MacOS Catalina)
Press the Volume Up button and release it on the iPad Pro
Press the Volume Down button and release it on the iPad Pro
Now press and hold the Power button until the iPad Pro screen turns black, this can take 10-15 seconds or so
While still holding the Power button, now press and hold both the Power and the Volume Down button for another 5 seconds
Release the Power button, but continue to hold the Volume Down button for another 10 seconds
At this point iTunes should pop-up an alert message stating that “iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes”, this indicates the iPad Pro is successfully in DFU mode
After the iPad Pro is in DFU mode it can be restored or updated as necessary.
If on the computer you do not see an “iTunes has detected an iPad in recovery mode. You must restore this iPad Pro before it can be used with iTunes” message, then start the process of entering DFU mode over again. Following the steps exactly is necessary to properly enter DFU mode.
If the iPad Pro screen turns on, or if you see an Apple logo on the iPad Pro, or if you see an iTunes logo on the display of iPad Pro, then the iPad Pro is not properly in DFU mode. If you see the iTunes logo on the screen it likely means the iPad Pro is in Recovery Mode instead, which sometimes is sufficient to restoring a problematic device, but generally people aim to enter DFU mode because Recovery Mode fails.
Usually you can simply restore the device from iTunes or MacOS to whatever the latest available version is, but you can also use firmware to restore from if desired. You can get iOS IPSW firmware files here if needed. To use an IPSW file you must be sure you are using the proper version for the particular device, and it must be actively signed by Apple. You must use an iOS firmware file that is compatible with the iPad Pro model, and the iOS IPSW file must be signed by Apple in order to use and restore from.
How to Exit DFU Mode on iPad Pro
Exiting DFU mode can be achieved by successfully restoring the device, or by rebooting the iPad Pro with the following steps:
Press and release Volume Up button
Press and release Volume Down button
Press and hold the Power button until the Apple logo appears on screen
This effectively force restarts the iPad Pro, causing it to leave DFU mode. Of course if an iPad Pro is ‘bricked’ and must be restored through DFU mode, then exiting DFU mode this way is not going to solve anything because the device must be restored through iTunes or macOS.
Every iPad, iPhone, iPod touch, Apple Watch, and Apple TV can enter into DFU mode (as well as recovery mode), though how to do so depends on the particular device and model. Other DFU mode instructions are as follows:
Ultimately using DFU mode with iPad Pro (or any other device) is rarely needed, because with almost all regular troubleshooting scenarios you can restore an iPad Pro either directly through iTunes, macOS, or by using Recovery Mode.
Rarely, an iPad may get stuck on an Apple logo screen when the device is booting or restarting. Getting stuck on the Apple logo usually happens during a failed software update, whether it was interrupted or incomplete, but it can sometimes happen during restores and during other operations as well.
If an iPad, iPad Pro, iPad Air, or iPad mini is stuck on an Apple logo screen, you can use the tips below to troubleshoot the problem and resolve the issue.
How to Fix an iPad, iPad Pro, iPad Air, iPad Mini Stuck on Apple Logo
This guide will aim to review troubleshooting solutions to resolve an iPad, iPad Pro, iPad Air, or iPad mini that is stuck on a black Apple logo screen. Follow in the order presented, and be sure to use the advice specific to the iPad model, as the troubleshooting steps differ between iPad with Face ID and iPad with Home buttons.
0: Wait! Does the Apple logo screen on iPad have a progress bar?
If the Apple logo screen has a progress bar underneath the Apple logo, then that likely means the device is installing a system software update, or is being restored. In that situation, you will not want to interrupt the system software update process.
If you see the Apple logo screen on an iPad and it has a progress bar underneath the Apple logo, let it sit for a while with the device plugged into a power source.
If a software update is being applied, the iPad will complete the installation and restart itself normally when it has finished.
You may pick up an iPad and notice it’s on the Apple logo screen seemingly out of nowhere if you have automatic iOS / iPadOS software updates enabled on the iPad. Just let the update complete, do not interrupt it.
If the iPad remains unresponsive and stuck on the black Apple logo screen for an extended amount of time, say after an hour or so, it may be stuck and need further troubleshooting. When the iPad is truly stuck on the Apple logo screen, use the troubleshooting tricks below to resolve the issue.
1: Force Restart the iPad
Sometimes simply forcibly restarting the iPad will resolve being stuck on an Apple logo screen. Forcibly rebooting an iPad varies on the iPad model and the iPad model year, use the instructions below depending on the specific iPad, iPad Air, iPad mini, or iPad Pro.
Force Restart iPad Pro 11″ and iPad Pro 12.9″ (2018 and newer)
You can force restart iPad Pro with Face ID (2018 and newer) including the iPad Pro 11″ and iPad Pro 12.9″ models, with the following instructions:
Press and release Volume Up, press and release Volume Down, press and hold Power button until the iPad Pro restarts
Force Restart iPad, iPad Air, iPad mini, and older iPad Pro
You can force restart an iPad with a clickable Home button, including iPad, iPad Air, iPad mini, and older iPad Pro models, with the following instructions:
Hold the HOME button and POWER button concurrently until the device screen turns off to black and back on to an Apple logo screen appears
Occasionally, force rebooting works and the iPad returns to the lock screen or home screen as usual. If not, carry on for more troubleshooting.
2: Update iPad with Recovery Mode (or Restore)
The next troubleshooting trick is to update the iPad using Recovery Mode. Using Recovery Mode requires the use of a computer (Mac or Windows PC) with a modern version of iTunes, and you will need a USB cable to connect the iPad to the computer. Much like force rebooting, entering Recovery Mode varies per iPad model.
Update iPad Pro with Face ID via Recovery Mode
If the iPad has Face ID and no Home button, you can enter Recovery Mode on iPad Pro (2018 and newer) with the following instructions:
Open iTunes on the computer (or Finder if Mac is running Catalina)
Press and hold the Power button and Volume Up button until the “Slide to Power Off” screen appears, then drag that slider to turn OFF the iPad Pro
Next, hold down the POWER button and connect the iPad Pro to a computer with a USB cable. Continue holding the POWER button until iPad is in Recovery Mode
Choose “Update” when the alert message appears on screen
Updating the iPad in Recovery Mode may take a while so be patient and let 20 minutes or so pass. If this is successful, the iPad Pro will update the system software and then reboot itself eventually back and work as normal.
If this fails, you will need to repeat the steps above, but at step 4 choose to “Restore” the iPad instead of ‘update’ (Important note: by restoring the iPad it will reset it as new and erase all data on the iPad, however if you have a backup you can restore from that backup when complete).
Update any iPad with Home button via Recovery Mode
If the iPad has a Home button, you can enter Recovery Mode on iPad, iPad Air, iPad mini, and older iPad Pro with the following instructions:
Open iTunes on the computer (or Finder if Mac is running Catalina)
Press and hold the Power button until the “Slide to Power Off” screen appears, then slide to turn OFF the iPad
Hold down the HOME button while connecting the iPad to a computer using a USB cable
Continue holding the HOME button until the iPad is in Recovery Mode and detected by the computer
Choose “Update” when the alert message appears on screen
Updating the iPad can take a while, give it at least 20 minutes to see if this works. If updating is successful, the iPad will reboot and become usable as usual.
If this fails, you will need to repeat the steps above, but at step 5 choose to “Restore” the iPad rather than update. (Important note: restoring the iPad will erase all data on the iPad and set it up as new, however if you have a backup you can restore from that backup during the setup after restore).
3: Erase & Restore iPad with DFU Mode
If the above Recovery Mode methods fail to resolve the issue, you can try to use DFU mode to restore the iPad or iPad Pro instead. DFU mode is a lower restore method that may work when Recovery Mode fails. Using DFU mode will erase the iPad completely, meaning all data on the iPad will be lost. If you have a backup of the iPad, you can restore the iPad backup to the iPad when DFU restore has finished.
Restoring iPad, iPad Air, iPad mini, older iPad Pro with DFU Mode
You can enter DFU mode on any iPad with a Home button with these instructions:
Connect iPad to a computer (Mac or PC) and launch iTunes (or Finder if Mac is running Catalina)
Hold down the POWER button and the HOME button at the same time, and continue holding both of those buttons for 10 seconds
After 10 seconds, release the POWER Button but continue to hold the HOME button for another 5 seconds
Choose to Restore the iPad with iTunes, this will erase all data on iPad and set it up as new
Connect iPad Pro to a computer and launch iTunes (or Finder if Mac is running Catalina)
Press and release Volume UP, then press and release Volume DOWN, then press and hold the POWER button for 10 seconds
While still holding the Power button, also press and hold Volume DOWN button for another 5 seconds
Release the Power button but continue to hold Volume DOWN for another 10 seconds
When you see an alert on the computer that a device has been detected in recovery mode, choose to Restore to erase the iPad and set it up as new
When the iPad Pro has successfully restored you can either set it up as new or then restore it from an available backup during the setup.
Fortunately getting stuck on a black Apple logo screen is a pretty rare occurrence for iPad, and while the same thing can happen on an iPhone it’s also not particularly common to run into with that device either. Usually the troubleshooting steps outlined above will resolve the issue. Let us know in the comments below what worked to resolve your problem.
Tried all of the above and still stuck on an Apple logo screen? Something else may be going on, so the next best option is to contact official Apple Support or an Apple Authorized Repair Center for further assistance in repairing the iPad, iPad Air, iPad mini, or iPad Pro.
Anyone with an AirPort Express like this one should install the latest security update.
Apple discontinued the AirPort line of wireless routers last year but continues to support them, including efforts to keep out hackers. The US government’s Cybersecurity and Infrastructure Security Agency (CISA) released a statement urging users of networking equipment to install a new firmware patch to block attacks.
Even though Apple stopped selling the AirPort line in 2018, and quit designing new models well before that, there are doubtless many still in use around the world. These should all get the new security patch.
A warning from the US federal government
The CISA’s statement about this update reads:
“Apple has released security updates to address vulnerabilities in AirPort Express, AirPort Extreme, and AirPort Time Capsule wireless routers with 802.11n. A remote attacker could exploit some of these vulnerabilities to take control of an affected system.
“The Cybersecurity and Infrastructure Security Agency (CISA) encourage users and administrators to review the Apple security page for AirPort Base Station Firmware Update 7.8.1 and apply the necessary updates.”
Apple’s own description of this update is couched in general terms, just saying that version 7.8.1 “improves the security of your base station.” The company’s support website has instructions on how to install this firmware update.
This update doesn’t bring any new features, but one released last year surprisingly added AirPlay 2 support to the AirPort Express.
Safari on the Mac can resume stopped downloads and restart failed downloads rather easily. For example, if you were downloading Xcode from Apple but your internet connection was interrupted and the download stopped, you can resume the download where it left off rather than restart the entire download over again. This is a great way to restart and resume incomplete downloads, regardless of the reason the file download failed, was interrupted or otherwise halted, and it’s available in the Safari download manager on Mac OS.
How to Resume Incomplete Downloads in Safari on Mac
From Safari on the Mac, click the Downloads button in the Safari toolbar, it looks like an arrow pointing downwards
Locate the stopped, stalled, or failed download, then click the orange circular arrow button to attempt to restart the download
The file should resume downloading where it was otherwise interrupted
Once the file, archive, image, or whatever else has completed downloading, it will appear in the Downloads folder on the Mac.
Note that Safari defaults to downloading things into the user Downloads folder, but you change the Safari download location on Mac if desired. Thus if you had previously changed the download location, you’d need to find the item there instead.
If you do need to start the download over from scratch, often an easy way to do that is to copy the downloaded files original direct download URL from Safari and simply paste that address back into the URL bar. Note that approach doesn’t always work with randomly generated CDN address downloads however. Similarly, you can find out where a file was downloaded from on the Mac by using Get Info in the Finder on the file, even if the file is only partially downloaded and incomplete.
Some other web browsers also support file download resuming as well, including Chrome, though how you go about resuming downloads in Chrome is different than what is discussed here in Safari.
Knowing how to put an iPhone 7 Plus or iPhone 7 into Recovery Mode can be valuable knowledge, as it is sometimes necessary for troubleshooting purposes.
Typically the need to use Recovery Mode is limited to troubleshooting some more unusual scenarios like when a device is completely stuck on an Apple logo, or if the screen shows a “Connect to iTunes” screen, but it can be used sometimes for downgrading of iOS versions too.
This tutorial will demonstrate you how to enter Recovery Mode on iPhone 7 and iPhone 7 Plus. This guide also applies to putting iPod touch (7th generation) into Recovery Mode too.
How to Enter Recovery Mode on iPhone 7 Plus & iPhone 7
Be sure you have a backup of iPhone before entering recovery mode, failure to do so may result in permanent data loss.
Press and hold the Side Power button on the iPhone until you see the slide-to-power off screen
Drag the slider to turn off the iPhone
Hold down the Volume Down button while connecting the iPhone to the computer with a USB cable
Continue holding Volume Down button until you see the Recovery Mode screen as you open iTunes on the computer (Mac or Windows, or in macOS Catalina open Finder)
iTunes (or Finder) will detect the iPhone in Recovery Mode
After the iPhone is successfully detected and in Recovery Mode, it can be restored with iTunes (or Mac Finder in 10.15+), or updated.
You can also use IPSW files if needed after an iPhone is in recovery mode.
It’s important to note that putting the iPhone 7 Plus and iPhone 7 into recovery mode is a different process from using Recovery Mode on prior iPhone models, and also from using Recovery Mode on later models. So if you’re accustomed to one method, recall that it can be a unique procedure depending on the actual iPhone model itself.
